紫铜排(铜母线)系列返回首页

紫铜排(铜母线)系列
发布时间:2011-12-22,查看次数:1821
产品编号:CQ00002 产品规格:规格最全,拥有模具上千套。

[产品应用]
 高导电紫铜排又称铜母线,广泛应用于高、低压配电设施的导电之间的连接。如:配电柜、变压器、高低压开关、母线桥架、电子散热器、 电器元件等。

[物理特性]
1. 密度8.9g/cm3    2. 导电率(20℃)≥56.27Ms/m或≥97.35%IAC或0.01777Ωmm2/m
3. 熔点1083℃         4. 每1℃温度电阻率数0.00382          5. 抗拉极限強度250-300MPa
6.延伸率≥6%          7.扎制截面误差≤1%                          8. B边弯曲90°不开裂
执行国家标准:GB5585.2-89 。

[Products]
High conductivity copper row, also known as copper bus bar, extensive application of high and low voltage distribution facilities between the conductive connection. Such as: power distribution cabinets, transformers, low voltage switch, bus bridge, electric radiator, electrical components and so on.

[Physical characteristics]
1.density 8.9g/cm3               2. Conductivity (20 ℃)≥ 56.27Ms / m or ≥ 97.35% IAC or 0.01777Ωmm2 / m
3. Melting point 1083 ℃      4. Every 1 ℃ temperature resistivity several 0.00382
5.ultimate tensile strength of 250-300MPa          6.Elongation ≥ 6%               
7. Rolled-section error ≤ 1%                8. B-side bend 90 ° without cracking

 

规格最全,拥有模具上千套。
The most complete specification, has thousands of sets of molds.

A、能供应最小的规格 ;
   如 厚度可做到 1 mm,      宽度可做到 8mm.
B、能供应最厚、最宽、最长的规格;
   如 厚度可做到 200mm,    宽度可做到 1000mm,     长度可做到 12000mm.
C、 能供应平角(直角)、R角、L型、U型、T型、凸字型、刀形、多面型、管型排(圆管、 方管) 等异型材;

A, Can supply the minimum specifications;
   Can be achieved if the thickness of 1 mm, the width can be 8mm.
B, Can supply the thickest, widest, longest specifications;
   Can be achieved if the thickness of 200mm, width can be 1000mm, length can be 12000mm.
C, Can supply straight angle (right angle), R angle, L, U-shaped, T-, convex shaped, knife-shaped,
   Multi-faceted type, discharge tube (round tube, square tube) and other profiles;

 

产品图片